On the four-part display you can follow the increasing degree of saturation of the P filter cartridge at any time. In case of a remaining capacity of less than 20%, the last segment starts flashing and instead of the operating hours, the filter cartridge number is displayed for a possible ordering process. If the cartridge is full, all 4 display segments will flash.
The key symbol indicates the need for maintenance. The letters A to C indicate the required BAUER maintenance interval.
Safety: The battery indication warns you when the battery needs to be changed.
When changing the battery or in case of prolonged storage without battery, the operating hours and maintenance times are saved in the device’s RAM memory.
Simple assembly: No tubes or wires, just a screwdriver is enough!
Extremely robust: for universal use, even in the harshest outdoor conditions: protection against dust and water splashes, resistant to salt, intense sunlight, high humidity and sand.
Bauer products
Depending on the compressor size, the warning signal is issued with a time window of approx. 1 to 7 hours before cartridge saturation occurs. The B-SECURUS filter control automatically disconnects the compression plant if the cartridge is completely saturated and has not been replaced.
In the event of a cable break or if there is no connection between the B-SECURUS and the control, a safety cut-out also occurs.
If the P filter system has no filter cartridges, the compressor cannot be started. The note is displayed optically.
The B-SECURUS filter control ensures optimum purity of the compressed breathing air according to DIN EN 12021 as well as the use of 100% of the BAUER filter cartridges used. The investment required for the B-SECURUS pays itself back in a short time. Calibration of the B-SECURUS system is not required.
¹ In case of correct installation and maintenance according to the service manual and in case of use of BAUER AERO-GUARD, provided that the CO 2 concentration in the aspirated air exceeds the predetermined standard values.
