Water-cooled GIB 26-SP

Reduced thermal load thanks to cylinder head cooling: for minimal wear.

Installation under the most difficult environmental conditions: thanks to direct water cooling of the compressor block.

Low compression and operating temperatures: thanks to multi-stage compression.

Fully equipped: with soft start and B-CONTROL II.

The combination of helical compressors and high pressure boosters allows a high flow in small dimensions. The compression occurs in 3 or 5 stages that allow low compression temperatures.

Thanks to the water-directed cooling of the intercoolers and aftercoolers and cylinder heads, most of the thermal energy is absorbed by the cooling water.

In this way, high pressure industrial compressors are extremely easy to maintain, have a long service life, and at the same time are quieter than equivalent air-cooled compressors. These compressors are specially designed for continuous operation in industrial environments and tough applications.

Water cooled compressors of the GIB-SP series, 110/365/420/520 bar.

DESIGNAÇÃO DE MODELO	FLUXO EFETIVO¹			PRESSÃO DE TRABALHO MÁX.		NÚMERO DE ETAPAS	REVOLUÇÕES	POTÊNCIA DO MOTOR	CONSUMO DE ENERGIA²	PESO LÍQUIDO APROX.
	L / MIN	M³ / H	CFM	BAR	PSIG		RPM	KW	KW	KG	LIBRAS
GIB 26.7-SP-110	15000	900	530	110	1600	3	1485	315	260	4600	10140
GIB 26.12-EN-365	10400	624	367	365	5300	5	1485	250	213	4400	9700
GIB 26.12-SP-420	10400	624	367	420	6100	5	1485	250	220	4400	9700
GIB 26.5-SP-520	10400	624	376	520	7540	5	1485	250	227	4400	9700

1 Flow according to ISO 1217, power consumption at maximum final pressure under defined frame conditions. Different ambient conditions will cause other performance data. Direct coupled installations: valid values for 50 Hz.

2 max. operating pressure = max. safety valve setting; lower shut-off pressure.

Files available in PDF format:

Water cooled